Cleaning and Greasing the Tractor Before Peak Sowing Week Ends
Peak sowing week is the worst time for a tractor breakdown. Dust, long hours and hurried work push machines hard. Cleaning and greasing the tractor before the week ends, and checking it daily, prevents small faults from becoming a lost day when every hour of sowing counts.
Clean Where Heat and Dust Gather
At the end of the day, blow or brush dust from the radiator, air filter area and engine bay, taking care around hot parts. A choked radiator makes the engine run hot, and a clogged air filter steals power and raises fuel use. Check the air filter as the maker directs and clean or replace it as needed. Wipe oil and diesel leaks clean so new leaks are easy to spot the next morning.
Grease the Points That Move
Grease steering, linkage and hitch points at the intervals in the tractor manual, and check the drill connections while you are there. Dry joints wear fast under load and make depth control sloppy. Look at pins, clips and bolts on the hitch; a loose connection changes drill depth across the field without the driver noticing.
Daily Fluid and Tyre Checks
Before starting, check engine oil, coolant and fuel, and look under the tractor for fresh drips. Check tyre pressure and lug nuts, especially on the side carrying drill weight on the road. Test lights if you will travel at dawn or return after dark, as many teams do in crushing and sowing season.
Keep a small kit with the tractor: spanners, pins, a tyre gauge and cleaning cloths. Thirty minutes of care each evening keeps the machine ready, the sowing even, and the team safe through the busiest week of autumn.

Comments
Post a Comment