Posts

Showing posts with the label Wheat

Second and Third Irrigation: Reading the Crop, Not the Calendar

Image
Why the Calendar Alone Misleads Many farmers irrigate wheat on fixed dates, counting days from sowing and turning on the tube well when the calendar says so. That habit is understandable, but it ignores the field in front of you. Two neighbouring fields sown on the same day can dry out at very different rates, depending on soil type, sowing depth, seedbed preparation, and how much moisture was stored before sowing. A light sandy field loses water faster than a heavy loam, and a field shaded by trees stays moist longer. The calendar cannot see any of this, but your eyes and your hands can. What the Crop Is Telling You Walk the field in the morning and look at the leaves. Young wheat that has enough moisture stands upright, with leaves a fresh green colour and tips that point outward. When water runs short, the leaves begin to fold inward along the midrib, the colour dulls, and the plants look tired even in the cool of the morning. Check the soil too: dig a few inches down with a khur...

Night Fog on Young Wheat: When Dew Helps and When It Hurts

Image
What Night Fog Does As nights cool in late October and November, fog and heavy dew become common over young wheat fields. Dew is not always a problem. A light dew can keep the leaf surface moist, reduce plant stress, and even help foliar nutrients or sprays stick to leaves. Young wheat can benefit from this moisture, especially when the soil surface is drying and the next irrigation is still a few days away. When Dew Hurts Dew becomes harmful when leaves stay wet for many hours, night after night, because prolonged leaf wetness favours fungal diseases such as rust and leaf spots. Fog that lingers into late morning keeps foliage damp and slows drying, and dense, over-fertilised crops hold moisture even longer. Fields in low-lying areas, near trees, or surrounded by tall crops are most at risk. What a Farmer Can Do Walk the field in the morning and note how long the leaves stay wet and whether the crop is drying by midday. Avoid late-evening irrigation during foggy spells, because i...

Wheat Emergence Check: Counting Plants in the First Two Weeks

Image
Why Count Plants? Counting plants in the first two weeks after wheat emergence tells you whether your sowing actually worked. Seed rate, seed depth, soil moisture, and seed quality all show up in the plant stand. A field that looks green from the road may still have thin patches where germination failed, and those patches will never catch up on their own. An early count gives you time to understand the problem and to plan, rather than discovering a thin crop at tillering when options are limited. How to Count Take a one-metre length of row, or a square frame of one metre by one metre if you have one, and count the plants inside it. Repeat this in at least five spots across the field, including the edges, the middle, and any low or high patches. Add the counts together and divide by the number of spots to get an average. Write the numbers down field by field, with the date, so you can compare fields and seasons. Reading the Result A reasonably uniform stand, with plants evenly spac...

Rust Alert: Recognising Yellow and Brown Rust in Time

Image
What Rust Looks Like Wheat rust is a fungal disease that spreads quickly in cool, damp weather, and early recognition is the best defence a farmer has. Yellow rust appears as bright yellow-orange stripes of small pustules running along the leaf, usually in lines between the veins. Brown rust, also called leaf rust, shows as scattered round or oval orange-brown pustules on the leaf surface, without the striped pattern. Both types can appear on leaves first, and in severe cases they move to stems and heads. When to Inspect Start checking fields regularly once the crop is established, and inspect more often during foggy, dewy, or drizzly spells. Walk the field in a zigzag pattern and look at leaves at different heights, not only the top leaves. Check low-lying or shaded patches first, because moisture lingers there and disease often starts in those spots. Rub a suspected leaf gently: rust pustules feel slightly powdery and may leave a coloured mark on your fingers. What to Do on Findi...

Fertilizer Top-Dressing Before Irrigation: Getting the Order Right

Image
Why the Order Matters Many farmers spread fertilizer and then wait for irrigation, or irrigate first and then spread fertilizer, without thinking much about the sequence. In wheat, the order matters because fertilizer must dissolve and reach the root zone without being washed away or left sitting on dry soil. When fertilizer is broadcast on dry ground and irrigation is delayed, nitrogen can be lost to the air, especially on warm days. When it is applied after heavy irrigation, it may stay near the surface or be carried off in standing water. The Right Sequence For a top-dressing, the usual practice is to spread the fertilizer on soil that is moist but not waterlogged, and then irrigate lightly soon afterwards. The irrigation carries the nutrients down to the roots where the young wheat plants can use them. Avoid flooding the field deeply straight after spreading, because a heavy flow can move fertilizer to low spots and leave high spots short. A steady, even irrigation works better ...

Wheat on Salty Patches: Varieties and Practices for Marginal Land

Image
Almost every village in the Rahim Yar Khan belt has them: pale, crusted patches in otherwise good fields where wheat comes up thin and yellow and never quite catches up. Salty patches are a fact of life on marginal land, but they do not have to be written off. With the right variety and a few careful practices, these patches can still contribute a respectable part of the harvest. Choose a Tolerant Variety Not all wheat handles salt the same way. Salt-tolerant wheat varieties recommended by the local agriculture department for saline soils germinate better and maintain growth where ordinary varieties fail. Ask for the current recommended list before buying seed, because the best choice changes as new varieties are released, and sow these varieties on the salty portions of the field even if the rest of the field gets your usual variety. Leach the Salt Before Sowing Salt accumulates near the surface where the seed sits. A heavy pre-sowing irrigation on well-drained patches pushes salt...

Covering Broadcast Seed: The Light Harrow Pass That Saves a Stand

Image
Broadcast sowing is still common on small fields across South Punjab, especially where a seed drill is not available on the day it is needed. Broadcasting itself is quick and simple, but what happens in the hour after broadcasting decides the fate of the whole crop. Seed left lying on the surface germinates poorly, feeds the birds, and leaves a patchy stand that no amount of later care can fix. Cover the Seed the Same Day Wheat seed needs firm contact with moist soil to germinate evenly. A light pass with a harrow or a plank immediately after broadcasting presses the seed into the soil and covers it to a uniform shallow depth. Do this the same day, while the soil surface still holds the moisture from rauni, because seed covered late or into drying soil emerges unevenly. Keep the Pass Light and Even The covering pass should be light. A heavy harrowing buries part of the seed too deep while leaving other parts exposed, which is worse than a careful light pass. On a well-levelled fiel...

Pre-Emergence Weeds in Wheat: Beating the First Flush

Image
The first flush of weeds is the most dangerous one a wheat crop ever faces. Within days of sowing, while the wheat seedlings are still tiny, broadleaf weeds and wild grasses germinate from the top layer of soil and begin stealing light, moisture and nutrients. A crop that loses this early race starts weak and never fully recovers, no matter how well it is managed later. Start With a Clean Seedbed Most early weeds come from seeds already sitting in the top few inches of soil. A well-prepared, level seedbed with one final shallow cultivation just before sowing destroys the weeds that germinated during land preparation. Fields that were left weedy during the fallow period carry a far heavier weed load, so the battle is half won or lost before the drill ever enters the field. Give Wheat the Head Start Uniform sowing depth, proper seed rate and timely first irrigation help wheat emerge quickly and close its canopy sooner. A vigorous, even stand shades the soil surface and suppresses lat...

Early November Sowing: Adjusting the Plan as the Window Closes

Image
The wheat calendar in South Punjab has a sweet spot, and it is already passing. The best sowing window for the Rahim Yar Khan and Rojhan belt runs from the last week of October into the first week of November, and every week that slips past it takes a little yield with it. If your field is still being prepared in early November, you do not need to panic, but you do need to adjust the plan. Raise the Seed Rate a Little As temperatures fall, wheat tillers less vigorously and each plant contributes fewer productive shoots. To keep the plant population healthy, increase the seed rate modestly for sowings made after the first week of November, as per local agriculture department guidance. Use certified, properly graded seed, and treat it before sowing to protect the young seedlings from seed-borne disease during their slow start. Watch Seed Depth and Soil Moisture In cooling soils, seed placed too deep emerges slowly and unevenly, and late-emerging plants stay weak all season. Keep the ...

Keeping a Simple Sowing Diary: Date, Variety, Seed Rate and Fertilizer by Field

Image
Memory fades by harvest time. Which variety went into the north field? What seed rate did you use after cotton? Which field received its basal fertilizer on time? A simple sowing diary answers these questions in seconds and turns one season's experience into next season's better decisions. One Page for Every Field Use a plain notebook and give each field its own page. Write the field name or number as you call it at home, its size, and the previous crop. Then record four things on sowing day: the date, the variety, the seed rate used, and the fertilizer applied at sowing, with any dose noted as per local agriculture department guidance. Add the source of the seed, whether home saved or purchased, because that matters when stands differ. Add the Small Details That Explain Results Note the sowing method, drill or broadcast, the date of rauni, and any problem such as a second rauni, a drill blockage or a delayed start. Later, add germination date, first irrigation date and a s...

Water Turns in Late October: Sharing Canal Water Fairly During Sowing

Image
In late October every farmer on a watercourse wants canal water at the same time: rauni for wheat, a watering for barseem, and last irrigations for standing crops. Turns, called warabandi, exist to share a scarce resource fairly. Respecting them during sowing avoids quarrels and saves water for everyone. Know Your Turn and Be Ready for It Check your day and hours in advance and have your field ready before your turn begins. Bunds repaired, outlets cleared and labour present mean your water goes to your crop, not into leaks and waiting. If your field is not ready, you lose the turn or waste it, and the loss cannot be recovered next week when sowing is even more urgent. Do Not Take Another Farmer's Time Cutting into a neighbour's turn or enlarging an outlet may fill your field today, but it breaks trust on the whole watercourse and invites the same treatment back. In a short sowing window, disputes waste more time than any shortage. If genuine hardship arises, such as a field...

Rauni Done Right a Second Time: When a Field Dries Before Sowing

Image
Rauni, the pre-sowing irrigation, is meant to give wheat even moisture for germination. Sometimes, however, a field dries out before sowing: the drill was delayed, hot winds blew, or another field took priority. Sowing into a half dried field gives patchy emergence. Doing rauni right a second time is better than hoping. Judge How Much Has Dried Dig at several places and check moisture down to sowing depth and below. If only the very surface has dried but moist soil sits within easy reach of the seed, light harrowing and prompt sowing may still work. If the top layer is dry and dusty for several centimetres, or the field has dried unevenly with wet and dry patches side by side, a second light rauni is the safer choice. Give a Light, Even Second Watering The second rauni should be lighter than the first. The aim is to recharge the top soil, not to flood the field and delay sowing by another week. Use smaller, levelled beds or basins where possible so water spreads evenly, and stop in...

Drill Calibration in Ten Minutes: A Simple Test Every Farmer Can Do

Image
A drill that drops too much seed wastes money, and one that drops too little leaves a thin crop all season. Calibration sounds technical, but a simple ten minute test on the farmyard gives you the truth before you sow a single acre. What You Need You need the drill hitched as it will work, seed in the hopper, a tarpaulin or clean sheet, a container, and a simple weighing scale. Work on level ground. Fill the hopper to a normal working level, because seed flow changes when the hopper is almost empty. The Ten Minute Test Jack up or support the drill safely so the drive wheel can turn, following the maker instructions for your machine. Mark the wheel, turn it the number of times that equals a known small distance, and collect the seed dropped from all tubes onto the sheet. Weigh it. Compare that weight with the target seed rate for that distance, adjusted as per local agriculture department guidance. Repeat the test once; two close results mean you can trust the setting. Adjust One S...

Storing Wheat Seed Safely for a Few More Days: Heat, Moisture and Pests

Image
Sometimes sowing is delayed by a few days: a field is still wet, cane has not been cleared, or the drill is busy elsewhere. Wheat seed stored badly in that short gap can lose germination quickly. Heat, moisture and pests are the three enemies, and all three can be controlled with simple care. Keep Seed Cool, Dry and Off the Floor Store bags in a shaded, ventilated room, never in direct sun and never against a damp wall. Raise bags on wooden planks or bricks so air moves underneath and floor moisture cannot climb into the seed. Keep the stack low and leave space between bags. A hot, airless store in late October can age seed faster than a week in a cool shed. Watch Moisture Every Day Seed that feels warm or smells musty needs immediate attention. Spread suspect bags in shade on a clean sheet for a few hours to air, then rebag only when cool and dry. Never store seed that was rained on or wetted during transport without drying it first. Keep drinking water, fertilizer and chemicals a...

Wheat Sowing in Late October: Keeping the Date When Work Piles Up

Image
Late October brings a pile of jobs at once: cane cutting, barseem care, cotton picking in some fields, and wheat sowing that cannot wait. When work piles up, the sowing date slips quietly, day by day, and yield slips with it. Keeping the date does not mean rushing. It means ordering the work so wheat gets its turn on time. Put Sowing First on the List Decide each evening which field will be sown tomorrow and work backwards. Seed, fertilizer as per local agriculture department guidance, fuel, and a ready drill should be in place the night before. If you start searching for these in the morning, half the day is gone before the first row is sown. Keep sowing material separate from storage for other crops so nothing is borrowed or misplaced. Split Labour, Do Not Split Attention Where family or hired labour is limited, give one team the sowing field completely and let other jobs wait a few hours. Half a team here and half there leaves both jobs unfinished. Sugarcane can often wait a day...

The Last Check Before the Drill Moves: Seed, Depth and Moisture Together

Image
On the morning the drill is due to move, a short pause saves a whole day of regret. Before the tractor leaves the yard, check three things together: the seed, the sowing depth you intend, and the moisture waiting in the field. Any one of them can be right on its own, yet the crop will still struggle if the other two are wrong. Check the Seed in Your Hand Open a bag in daylight and look closely. Good wheat seed is clean, bold and uniform, with no dust, no broken grains and no smell of damp storage. Take a handful from the top, middle and bottom of the bag, because problems often hide in one layer. If you did a wet cloth germination test, sow only when the result was strong. If seed looks mixed or shrivelled, do not hope the drill will sort it out. It will not. Set Depth Before You Enter the Field Decide the depth while you are still on firm ground. In most South Punjab soils in late October, wheat seed needs firm contact with moist soil, covered well but not buried so deep that the ...

Broadleaf Weeds in Wheat: Control Them While They Are Small

Image
  Broadleaf weeds are the quiet thieves of the wheat field. Bathu (lamb's quarters), jangli palak (wild spinach), senji (sweet clover) and similar weeds germinate along with the wheat in South Punjab and compete for the same water, nitrogen and sunlight. A heavily infested field can lose a serious share of its yield, yet the same weeds are easy to defeat — if you fight them while they are small. The critical window Weeds do the most damage in the first thirty to forty-five days, when the wheat is tillering and its canopy has not yet closed. At this stage the weeds are also at their weakest: two to four leaves, shallow roots, soft tissue. A herbicide spray or a round of hand weeding now clears the field almost completely. Wait until the weeds are tall and flowering, and they become tough, need more effort to kill, and have already stolen weeks of food and water from the crop. Control them properly For small fields and patches, hand weeding with a khurpa after the first irrigation is...

Nitrogen in Splits: Why One Big Urea Dose Wastes Money

Image
  It is a scene repeated across South Punjab every season: a farmer buys his urea, spreads the whole season's dose on the young wheat in one go, and feels the job is finished. It feels efficient, but agronomically it is one of the most expensive mistakes in wheat farming. A large share of that single big dose never reaches the plant at all. Where the nitrogen goes A three-week-old wheat plant is small; its roots can absorb only a fraction of the nitrogen around it. The rest is exposed to loss. On our alkaline soils, urea left on a dry surface loses nitrogen to the air as ammonia gas. In sandy patches, heavy irrigation pushes nitrate below the root zone. The result is the same: you paid for a full dose and the crop received perhaps half of it. The plant then starves later, at jointing and grain filling, exactly when its demand is highest. Feed the crop when it is hungry Wheat takes up nitrogen in stages, so supply it in stages. A portion goes at sowing with the basal fertiliser. The...

Germination Looks Thin? What to Do in the First Three Weeks

Image
  Three weeks after sowing, you walk into your wheat field and your heart sinks: the stand looks thin, with bare patches showing between the rows. Do not panic, and do not rush to plough it up. Thin germination is common in South Punjab, and in most cases the crop can still be nursed into a respectable harvest if you act correctly in the first three weeks. Find the cause before the cure Walk the field and look closely. Seed sown too deep often emerges late and weakly, especially in heavy soil. A hard surface crust after an early irrigation or shower can trap seedlings underground. Dry pockets in an unlevelled field germinate late or not at all. Poor-quality seed with low germination, and patches where seed was eaten or rotted in wet spots, are the other usual culprits. Knowing the cause tells you whether the missing plants are truly dead or simply late. What you can still do If seedlings are still pushing through, a light irrigation softens the crust and brings late germinators up....

The First Irrigation of Wheat: Timing the Crown-Root Stage

Image
  If there is one irrigation that decides your wheat yield in South Punjab, it is the first one. It must fall at the crown-root initiation stage, roughly twenty to twenty-five days after sowing, when the plant begins forming the strong crown roots that will feed it for the rest of the season. Miss this window and the plant never fully recovers, no matter how much water and fertiliser you give it later. What is happening inside the plant In the first three weeks, the seedling lives on a small seminal root system. Around the third week it starts producing crown roots just below the soil surface, and tillering begins at the same time. These crown roots take over the job of absorbing water and nutrients. If the soil is dry at exactly this moment, root growth slows, tillers are reduced, and the final number of ears per acre is fixed at a lower level. This is why experienced farmers call the first irrigation the "tillering irrigation". Reading the field, not just the calendar Count...